| Toll-Free (Canada): | (800) 957-2690 |
| Local Phone: | (905) 318-8278 |
| Local Fax: | (905) 318-1970 |
| E-mail: | sales@grahammachine.ca |
Official Distributor for :
A Variable tooth with 0 deg. rake angle with special group set. The M42 Sprint cuts even the lightest sections with less vibration. Short chipping materials are cut without a problem for long life and low cost cutting.
Cutting Specifications
The specially designed variable tooth with an extremely positive rake for angle cuts. Cuts aggressively in tough materials. Reduces cutting force for easy chip formation.
Cutting Specifications
The specially designed variable tooth with a slightly positive rake angle combined with a special group set that controls the chipping on lighter general purpose machines. Blade life increases and grants a smoother cut.
Cutting Specifications
The Variable tooth with a slightly positive rake angle
and a heavy group-set shows excellent performance on H-beams and similar shapes. The profiler sprint avoids pinching in beams with inside tension, or in poorly supported profiles for 90° a1 and miter cutting.
Cutting Specifications
This heavy set tooth with positive rake angle avoids blade pinching and cuts larger work with no vibration. ALUCUT-SPRINT for increased productivity and low cost per cut.
Cutting Specifications
Made with precision borazon ground tooth tips. A variable tooth with ground multi-chip geometry positive rake angle and group set. Perfectly divided chips and excellent band guidance. The sharpest cutting edges grant reduced cutting forces and great accuracy.
Cutting Specifications
The positive variable tooth with special strong tooth forms. High heat and wear resistant of Hss M51 tooth tips Increase band life on all hard and problematic steels.
Cutting Specifications
Precision Borazon ground tooth tips. The Variable tooth with an extremely positive rake in connection with the ground tooth geometry and variable tooth set generate a superior chip distribution.
Cutting Specifications
Carbide tips welded to the blade back with the latest Technologies and precise ground tooth tips with multi-chip geometry to allow fastest cutting rates and vibration free operation with optimum tool life.
Cutting Specifications
Carbide tips welded to the blade back with the latest Technologies and precise ground tooth tips with multi-chip geometry to allow fastest cutting rates and vibration free operation with optimum tool life.
Cutting Specifications